|Abacre Home > Abacre Inventory Management and Control Home|
|Help Home | Purchase | Download | Feedback | Printable Manual|
How to use Abacre Inventory Management and Control in network?
Five steps to setup AIMC in your business's network:
1. Know your DB file name.
Please lookup which database file do you use: start AIMC and in Login window you should press [More] button. In path to DB you will find file name of your DB. Normally it's aimc.fdb or aimc-test.fdb.
By default DB file located in the folder: \My Documents\Abacre Inventory Management and Control 5\
2. Decide which computer will be your Firebird database server
You may install Firebird database on one of your POS computers or you can use a separate computer for Firebird's installation.
3. Download and install Firebird server.
That's all. Firebird database server will be automatically up and running.
4. Create a folder for DB file.
We recommend you to create a new folder on your computer running Firebird server. Place there DB file. For example you may create C:\AIMC\ folder. If you use aimc.fdb as DB file, move it into C:\AIMC\ folder.
5. Specify location to DB file in AIMC.
Start AIMC on each computer:
Note: You must use full path to database file on server. If you use relative path, for example, just aimc.fdb, you will get error with code 902 (database file not found).
6. Setup other computers in the network.
Start AIMC on all other computers in network. On Login window repeat only the step 5.
Still need help? Purchase at least two licenses and we will help you to setup networking using remote administration software (by connecting to your computers remotely and doing all needed configuration free of any additional charge).
|Contact Us | Free Newsletter|
Copyright © 2017 Abacre Limited