Page 1 of 1

How to setup cash drawer to open

Posted: Mon Apr 25, 2011 3:01 am
by tungglry
My window crash and when I restart the POS system, the setting is gone. I want to setup the cash drawer again to open when after print bill. I setup the phone line to connect direct to printer. At the bottom it's has a field "comand to send to printer".

What do I need to type or do next? I cannot get the cash drawer to open after print bill.

Please help.

Re: How to setup cash drawer to open

Posted: Fri Apr 29, 2011 1:50 am
by Myles
what type of cash draw do you have and how is it connected to the pc ?

Re: How to setup cash drawer to open

Posted: Mon May 02, 2011 5:15 pm
by Abacre
For the case when cash drawer is connected directly to printer, we give you step-by-step instructions:

1. Start ARPOS.
2. Go to menu Configuration - Bill Configuration - Cash Drawer and
Pole.
3. Check option "Use Cash Drawer".
4. Press "Details" button located right to the "Use Cash Drawer"
option.
5. On new window select "Direct connection to Printer" as "Connection
method".
6. Select "Hexadecimal" for "Format" option.
7. Copy paste the following command:
1B;70;00;19;FF
8. Press OK in this window.
9. Press OK in "Bill Configuration" window.
10. Close ARPOS.
11. Start ARPOS again.
12. Go to menu Configuration - Bill Configuration - Cash Drawer and
Pole - press "Open" button
or
use "Open Cash Drawer" button located on window New Order -
Close Order - Take Payment.

It should be working now.
If it does not work, then use the following command:
1B;70;00;19;7D
1B;70;30;30;A0;A0

Restart ARPOS.